Steering Components FAQ Information

Key Features - FAQ

You have a variety of different rack and pinion steering boxes available, how do I know which one is best for my application? - The selection of a rack and pinion unit depends on application and the Morrison Chassis you select. Opel, Pinto and 79-93 Mustang are all available, with manual or power options on the Mustang units. If you have questions...

Do I need a "steering shaft support" on the shafting between two u-joints? - If more than two u-joints are used in a steering system, some sort of "steering shaft support" must be used to prevent "looping or binding". A simple support can be made by using a specially designed...

What shaft material should I use? - This decision depends on application. For most racing applications 4130 tubing is the norm. For street driven vehicles you can choose from splined shafting or single or Double-D shaft material. It will provide a solid and...

What is the best way to secure the u-joint(s) to the shaft material? - There are a variety of methods for securing your u-joint(s) to the shaft material: Pinning: Common practice is to use two 3/16" diameter roll pins in each yoke at right angles to each other and approximately 3/8"...

What About U-Joint Orientation? - When two joints are used on a shaft, the forks of the yokes closest to each other should be in line, not out of phase. Premature wear or binding can result if your u-joints are not phased properly. Please see the diagram...